BUILD A 3D LASER SCANNER THAT MAPS A WHOLE FOREST

A workbench build that scans a forest in 3D for a fraction of the price of a Leica BLK360.

by NorthWorks Lab

RoboticsScience

Built withESP32

difficulty
●●●●○
time
a weekend-plus
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

NorthWorks Lab built a 360° 3D LiDAR scanner around an LDROBOT D800 sensor, an ESP32-S3, a TMC2209 stepper driver, and a 3D-printed case. A motor spins the sensor through a full rotation while the ESP32 streams point cloud data over Wi-Fi to a custom Android app. A forest scan came out at 1.98 million points. The build looks clean and the forest demo is compelling, but the project has no public repository, no files, and no instructions. The video shows the scanner working but does not explain how to build one. The maker has not said what it cost, what the Android app does, or whether the firmware will be released. If you want to replicate this, you will be reverse-engineering it from the video. The single biggest risk is that you build the hardware and then discover the Android app is not available — the video does not show where to get it. This is an impressive proof of concept, but it is not a build guide.

GOOD TO KNOW

  • —No repository — the project exists only as a YouTube video.
  • —No CAD files, no firmware, no BOM, no instructions.
  • —The creator says the project is still being refined and tested.
  • —No stated licence.
  • —The maker has not published a cost breakdown.
  • —Commercial use status unknown.

Parts to buy

7 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • LDROBOT D800 LiDAR sensorFind
  • ESP32-S3Find
  • TMC2209 stepper driverFind
  • NEMA stepper motorFind
  • OLED displayFind
  • 1S Li-ion batteryFind
  • Motor controller boardFind

Can I build this?

Print3D-printed case (design not published)
BuyLDROBOT D800 LiDAR sensor, ESP32-S3, TMC2209 stepper driver, NEMA stepper motor, OLED display, 1S Li-ion battery, motor controller board
Tools3D printer, soldering iron, multimeter, Android phone
SkillsAdvanced — ESP32 programming, motor control, Wi-Fi streaming, Android app development, and point cloud processing. You will be writing most of it yourself.
TimeA weekend-plus if you already know ESP32 and stepper control; weeks if you are learning as you go and writing the Android app from scratch.
Cost$$ — LiDAR sensor, stepper motor and driver, ESP32, battery and printed case.
SafetyNone beyond ordinary electronics care.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

I Built a 3D LiDAR Scanner - And It Actually Works

Shows the scanner working in a forest but does not provide build instructions or code.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the NorthWorks Lab video to see what the scanner does (The only public documentation.)
  2. 2.Source an LDROBOT D800 LiDAR sensor(This is the core component — confirm it is available before committing.)
  3. 3.Prepare to reverse-engineer the firmware and Android app(Neither is published. You will be writing both from scratch.)

KNOWN ISSUES

  • No firmware, no Android app, no CAD files — you are reverse-engineering the entire build from a video.
  • The Android app is shown receiving point cloud data over Wi-Fi, but there is no download link or source code.
  • The D800 sensor is not as common as a cheaper 2D LiDAR — confirm availability and datasheet before buying.
  • The video does not show how the stepper motor is synchronised with the LiDAR data, which is the hardest part of the firmware.
  • The project is described as 'still being refined' — this is not a finished design.
  • No cost breakdown means you could be halfway through the build before realising you are over budget.

Is the firmware available?

No. The video does not link to any code.

Can I download the Android app?

No public link exists. You would need to write it yourself.

How accurate is it compared to a Leica BLK360?

The creator does not claim millimeter accuracy or colour capture — this is a hobbyist scanner, not a survey tool.

What does it cost to build?

Not stated. The maker has not published a cost; the D800 is a low-cost LiDAR sensor of the kind used in robots.

Can I use this commercially?

Unknown — no licence is stated.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

1.98 million points from a forest scan, and the whole scanner fits in a 3D-printed case. What would you scan first if you had one running?

CompareeTEAM8d ago

Practical notes from our verification: the video is the only documentation — no repository, no firmware, no Android app download, no CAD files. The creator states the project is still being refined. The D800 sensor is less common than cheaper 2D LiDAR modules, so confirm availability before ordering. The hardest part will be writing the firmware to synchronise the motor position with the LiDAR data stream, and then writing the Android app to receive and display the point cloud over Wi-Fi. If you are expecting ready-to-run code, this is not that project.

NorthWorks Lab

NorthWorks Lab builds electronics and robotics projects. Contact is via email and Patreon only — no public GitHub or Instagram.

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.