TURN A NINTENDO WII INTO A GAME BOY COLOR
A real Wii motherboard, cut down and rewired to fit in a handheld the same size as a Game Boy Color, with no emulator inside.
by GingerOfOz
- difficulty
- ●●●●●
- time
- a month-plus
- license
- license not specified
- repo
- repo
●●●●● · a month-plus · license not specified · repo
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
This is a technical showcase, not a build you can start today. GingerOfOz cut a real Wii motherboard down to handheld size, fitted it with a 480p IPS screen and Hall effect sticks, and wrapped it in a case the same dimensions as an original Game Boy Color. It plays Wii, GameCube and Virtual Console games with no emulation. The flex PCB in version 2.0 cleaned up the wiring dramatically. But the boards, case files and parts list are promised, not published. If you want one now, you buy a finished unit for around 1,500 dollars. If you want to build your own, you wait for the files or reverse-engineer from the video. This is a wildly impressive technical achievement aimed at collectors and modders willing to spend serious money or serious time. The one thing most likely to go wrong is starting before the files drop and discovering halfway through that a critical dimension or part number is missing.
IN THE REPO
GOOD TO KNOW
- —The boards, case files and parts list are promised but not published yet.
- —There is no repository, no open-source release, and no licence to copy from.
- —GingerOfOz sells finished units for about $1,500 USD.
- —The project video is a build log and demonstration, not a how-to guide.
- —This is version 2.0, which uses a flex PCB to replace more than half the wiring of the first version.
- —It is not the only portable Wii project, but it is one of the smallest.
Parts to buy
6 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
Wiiboy Color 2.0
Build log and demonstration of version 2.0. Shows the trimmed motherboard, flex PCB, assembly process, and gameplay footage. Not a step-by-step guide.
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Watch the build video to understand the scale of the project (This is a demonstration, not a tutorial. You will see what is possible, not how to do it yourself yet.)
- 2.Follow GingerOfOz on Instagram for file release announcements(The boards, case and BOM are promised but not published. Files will appear there first.)
- 3.Research other portable Wii projects while you wait(BitBuilt forums have years of portable console modding threads. You will need those skills before you start.)
KNOWN ISSUES
- The files are not released yet. If you start now, you are reverse-engineering from video timestamps and risking expensive mistakes.
- Trimming a Wii motherboard is unforgiving. Cut a trace wrong and the board is scrap. Practice on a sacrificial board first.
- The flex PCB is custom. You cannot buy it off-shelf. You either wait for the Gerbers or recreate it yourself from the video.
- The case is sized for a Game Boy Color, but the internals are dense. Assembly order matters — plan it before you commit to soldering.
Can I build this today?
Not unless you reverse-engineer it from the video. The boards, case files and parts list are promised but not published yet.
How much does it cost to build?
The creator sells finished units for about 1,500 dollars. A parts list and build cost have not been published yet.
Is this the only portable Wii?
No. Portable Wii builds have been made by other modders too. This one stands out for being the size of a Game Boy Color.
Does it emulate the Wii, or is it real hardware?
Real hardware. It is a trimmed Wii motherboard running native Wii and GameCube games.
What is the hardest part?
Trimming the motherboard without destroying it. One wrong cut and you lose the board.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
GingerOfOz trimmed a Wii motherboard down to Game Boy Color size and wrapped it in a custom case with Hall effect sticks — but the files are not released yet. If they dropped tomorrow, would you start, or would the motherboard trimming put you off?
GingerOfOz
GingerOfOz is a console modder known for extreme portable builds. The Wiiboy Color 2.0 is the second version, which replaced most of the wiring with a custom flex PCB. GingerOfOz sells finished units for about 1,500 dollars.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM6d ago
Practical notes from our verification: the boards, case and BOM are promised in the video at 6:54–7:14 but not published as of this page going live. The only public source is the YouTube video, which shows the build process but is not a step-by-step guide. The Instagram handle is confirmed in the video description. We did not find a repository, a project page, or a licence. If you want to build this before the files release, you are reverse-engineering from video timestamps — doable for someone with portable console experience, but expensive to get wrong.