TURN A STEAM DECK OLED INTO A 32GB ONE

SlickBuys lifted the original memory chips off the Steam Deck OLED board with hot air and soldered on 32GB replacements.

by SlickBuys Mods and Repairs

Open-hardware

difficulty
●●●●●
time
a full day
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

This is a professional BGA rework job, not a weekend project. SlickBuys took a Steam Deck OLED, removed the soldered 16GB LPDDR5 memory chips with a hot air station at 350°C, cleaned the pads, and soldered on 32GB replacements that cost about 110 dollars. Then he pulled the BIOS chip, edited the memory tables so the system recognizes the full 32GB, and put it back. On first boot the memory trains for about a minute with the charger connected, and Steam then reports 30.19GB of usable RAM instead of 14.46GB. The mod works, but the video shows no game benchmarks, so you get double the memory on paper with no proof of extra FPS in practice. The one thing most likely to go wrong is lifting a pad during chip removal or damaging the board with too much heat. This is for someone who already does BGA rework commercially or has done successful chip replacements before — the video is a demo, not a tutorial, and you will need to find compatible memory chips, figure out the BIOS editing yourself, and accept that you have voided the warranty on a 949-dollar handheld. If you just want more RAM and do not have the tools or skills, this is not the project. It is proof the upgrade is possible, not a guide to doing it yourself.

GOOD TO KNOW

  • —This is a paid repair shop service documented in a single YouTube video, not an open-source project with files to download.
  • —The video shows the procedure but does not provide BIOS editing instructions, memory chip part numbers, or a written guide.
  • —No PCB files, BOM, or firmware are published. You would need to source compatible LPDDR5 chips and know how to edit APCB SPD tables yourself.
  • —The same mod was done on the LCD Steam Deck in 2023 by dosdude1, so the concept is proven but not documented as a build guide.
  • —This voids your warranty and requires BGA rework skills. The video shows no game benchmarks, so the performance gain is unproven.
  • —No licence applies because no design files are released.

Parts to buy

2 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • 32GB LPDDR5 memory chipsapprox. $110Find
  • Compatible with Steam Deck OLEDFind

Can I build this?

Printnothing required
Buy32GB LPDDR5 memory chips (approx. $110), compatible with Steam Deck OLED. Part numbers not provided in the video.
ToolsBGA rework station, hot air station (350°C capable), soldering iron, flux, tweezers, BIOS programmer, APCB SPD editing software, preheater (130-150°C)
SkillsAdvanced BGA rework, chip-level soldering, BIOS editing, and firmware flashing. This is repair shop territory.
TimeA full day if you have done BGA work before. Longer if you are figuring out the BIOS editing or sourcing the right chips.
Cost$$. Memory chips are about $110. The rest is tools you already own or this project is not for you.
SafetyHigh heat (350°C) near lithium batteries. Work with the battery disconnected and the board removed. Voiding the warranty on a 949-dollar device is the real risk.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

Steam Deck OLED 32GB RAM Upgrade

Shows the chip removal, soldering, BIOS editing, and boot. No game benchmarks or part numbers.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the SlickBuys video to see the process. It is a demo, not a step-by-step guide. (The video shows chip removal at 2:02, BIOS editing at 4:31, and the first boot at 9:12.)
  2. 2.Source 32GB LPDDR5 memory chips compatible with the Steam Deck OLED. The video does not name the part number.(This is the hardest part to get right. The wrong chips will not train or will damage the board.)
  3. 3.Set up a BGA rework station with preheater (130-150°C) and hot air (350°C). Disconnect the battery and remove the board.(If you do not already have this equipment, this project is not the place to learn.)
  4. 4.Remove the original chips, clean the pads, and solder on the new ones. Then program the BIOS with updated APCB SPD tables.(The BIOS editing is not documented in the video. You will need to figure it out or already know how.)

KNOWN ISSUES

  • The video does not provide part numbers for the 32GB memory chips. You have to source compatible LPDDR5 chips yourself, and the wrong ones will not work.
  • This is BGA soldering under a microscope. If you have never lifted a chip off a motherboard before, you will lift a pad or bridge something and kill the board.
  • The BIOS editing is shown but not explained. The video cuts from 'BIOS chip read' to 'memory tables edited' with no detail on the software or process.
  • No benchmarks are shown, so the performance gain is theoretical. You get 32GB in the settings screen, but the video does not prove it helps in any game.
  • This voids your warranty immediately. If anything goes wrong, you own a broken 949-dollar Steam Deck.
  • The charger must be connected on first boot or the memory will not train. The video says this but does not explain why.

Does this actually improve game performance?

The video shows 32GB in the system settings but no game benchmarks. The memory is doubled on paper, but there is no proof it increases FPS in practice.

What memory chips do I need?

The video does not say. You need 32GB LPDDR5 chips compatible with the Steam Deck OLED, and finding the right part number is on you.

Can I do this without BGA rework experience?

No. This is chip-level soldering with high heat near a lithium battery. If you have to ask, you will break the board.

Is this the first time someone has done this?

No. dosdude1 did the same mod on the LCD Steam Deck in 2023. This is the OLED version.

How long does the memory training take on first boot?

About one minute and ten seconds, with the charger plugged in.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

The chips cost about 110 dollars and the mod doubles the RAM to 32GB, but the video shows no game benchmarks. Would you risk a 949-dollar warranty for more memory with no proven FPS gain?

CompareeTEAM14d ago

Practical notes from our verification: this is a repair shop demo, not a build guide. The video shows the chip swap and BIOS edit but does not provide part numbers, editing instructions, or benchmarks. The same mod was done on the LCD Deck in 2023, so the concept works, but you are on your own for sourcing compatible LPDDR5 chips and figuring out the APCB SPD tables. The single biggest trap is assuming this is a DIY project — it is a professional BGA job that voids your warranty the moment you open the case, and the performance gain is unproven because no games are shown running.

SlickBuys Mods and Repairs

This video documents a 32GB RAM upgrade on a Steam Deck OLED, lifting the original chips and soldering on replacements with twice the capacity.

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.