TURN TWO KODAK FACTORY ROBOTS INTO A BREAKFAST MACHINE

Two industrial SCARA arms that once built disposable cameras now make toast, fry eggs, and run a coffee machine — and the pair cost 80 dollars on eBay.

by Coy Beardmore

RoboticsAutomation

Built withArduino3D printing

difficulty
●●●●●
time
weeks
license
license not specified
repo
repo ACTIVE1 stars
1
Jump to section

COMPAREE VERDICT

This is a showpiece, not a reproducible build. The GitHub repository gives you the Arduino sketch and the CAD for the egg cracker and tool mounts, but it does not teach you how to program an Adept 550 controller or how to find one cheap. Coy Beardmore paid 80 dollars for the first arm and got a second free because he knew what to look for and could talk the price down — If you already own industrial robots or work somewhere that is scrapping them, this project shows what is possible with an Arduino as the coordinator and ready signals as the handshake. If you do not, the entry cost and learning curve are both steep. The breakfast itself takes several minutes and the two arms never run in parallel, which limits the spectacle. The real achievement here is not speed or polish, it is proving that obsolete factory hardware can be repurposed at all. Most people will watch the video and move on; the few who have access to surplus industrial robots will find the concept inspiring and the code a useful starting point, but they will still have to solve most of the hard problems themselves.

GOOD TO KNOW

  • —GitHub has Arduino code for the support systems (servos, relays, signals) and CAD files for the custom fixtures.
  • —No bill of materials, no wiring diagrams, no step-by-step build guide.
  • —The hard part is not on GitHub: finding the robots, learning their proprietary controller language, and reverse-engineering the communication protocol.
  • —The two robots do not run at the same time — the builder never solved that coordination problem.
  • —Parts of the assembly use magnets and rubber bands as fasteners.
  • —The builder states the copper tube in the toaster is probably not food grade.

Parts to buy

9 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

Can I build this?

PrintCustom tool mounts and fixtures — CAD is in the repository.
BuyTwo Adept SCARA robots with controllers, Arduino, servos, relays, mini fridge, toaster, pan, Keurig, and all the mounting hardware. The robots are the entire cost.
ToolsKnowledge of industrial robot programming, ability to reverse-engineer proprietary controller protocols, 3D printer, soldering iron, hand tools.
SkillsExpert level — this is not a first robotics project. You need embedded programming, mechanical fabrication, and experience with industrial automation or a lot of time to learn it.
TimeWeeks to months if you are learning the robot controllers from scratch. A weekend if you already know Adept V+ language and have all the hardware.
Cost$$$ if you buy at normal prices: a newer Adept Cobra SCARA was promoted at about 18,000 dollars new. He paid 80 dollars plus shipping for one and got the second for free.
SafetyMains voltage for the appliances. Industrial robot arms have serious crush and impact hazards — these are not hobby servos. The builder mentions a copper tube that is probably not food grade.

This build involves mains voltage — for adults comfortable with electrical work only.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

Industrial Robot Arms Making Breakfast Adept 550

Full breakfast sequence with both robots.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the YouTube video to see what the system actually does and how long it takes.
  2. 2.Check the GitHub repository for the Arduino code and CAD files. (Code and CAD only — no build instructions.)
  3. 3.Learn Adept V+ programming if you do not already know it, or find documentation for whatever robot brand you source.(This is the longest step and nothing in the repository helps you.)

Resources

Documentation, files and community threads for this build — we link straight to the original sources and never rehost the creator’s files.

KNOWN ISSUES

  • Cheap surplus robots are luck: his came from a seller with barns of used robots, and many listings come without controllers or cables.
  • The GitHub repository does not teach you how to program the robot controllers. Adept uses a proprietary language called V+ and the documentation is not widely available. If you have never worked with industrial robots, expect weeks of learning.
  • The two robots do not run at the same time. The builder states he never figured out how to coordinate them, so one finishes before the other starts. If you want parallel operation, that problem is still unsolved.
  • No bill of materials, no wiring diagram, no pinout for the Arduino. You are reverse-engineering the build from the video and the code comments.
  • The copper tube in the toaster is called out as probably not food grade. If you are building this for real use rather than demonstration, material safety is on you to solve.
  • Industrial robots have real crush hazards. These are not hobby arms — they are fast, strong, and designed for a safety-rated industrial cell. If you do not know how to set up an e-stop and work envelope, do not turn them on.

Can I build this without industrial robots?

Not this exact project, but the concept of using an Arduino to coordinate multiple axes and appliances works with hobby servos and linear actuators. You would lose the speed and precision, but the control logic is similar.

Where do I find cheap SCARA robots?

eBay, industrial surplus auctions, and factory liquidation sales. Search for brand names like Adept, Epson, Yamaha, and Denso. Expect to spend months waiting for a deal, and always check that the controller is included — a robot without its controller is just an expensive sculpture.

What does the Arduino actually do?

It drives the extra axes that are not part of the robot — the servos for the egg cracker, the relays for the appliances, and the ready signals that tell each robot when the previous step is done. The robots themselves run their own proprietary controllers.

Is this food safe?

The builder says the copper tube in the toaster is probably not food grade. Beyond that, parts are held on with magnets and rubber bands, so calling this food safe would be generous. It is a demonstration, not a commercial kitchen.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

These Adept 550 arms cost 80 dollars for the pair on eBay because someone knew what to search for and could talk the price down — If you have ever scored surplus industrial hardware, what did you find and where?

CompareeTEAM1d ago

Practical notes from our verification: the GitHub repository has Arduino code and CAD files but no build instructions, no BOM, and no wiring diagrams. The video clearly shows the robots working, but Coy states on camera that he never solved running both at the same time, and that the copper tube in the toaster is probably not food grade. The breakfast sequence takes several minutes and uses magnets and rubber bands as fasteners in places. This is a demonstration of what is possible if you already have the robots and the knowledge to program them, not a weekend project for someone starting from zero.

Coy Beardmore

Coy Beardmore found an Adept 550 SCARA robot arm on eBay, talked the seller down to 80 dollars, and got a second one thrown in for free. The robots used to work at a Kodak plant building disposable cameras. He reverse-engineered the controllers, wrote the coordination software, and built the breakfast cell around them.

GitHub

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.