TURN AN OLD OFFICE PC AND SPARE DRIVES INTO YOUR OWN NAS

A used office PC and whatever drives you already have can replace a 600 dollar Synology.

by Hardware Haven

HomeAutomation

difficulty
●●●○○
time
a weekend
license
license not specified
repo
repo
1
Jump to section

COMPAREE VERDICT

Hardware Haven shows that a used office PC can do most of what a store-bought NAS does if you are comfortable with Linux and already have drives lying around. The Lenovo ThinkCentre E73 with a 4th generation Intel i5 is inexpensive on the used market, and an ASM1166 SATA card adds the ports the board is missing. OpenMediaVault gives you SMB shares, SnapRAID adds parity protection, and MergerFS pools mismatched drives into one volume. Unused drives spin down and the box idles around 21 W. A Synology DS923+ 4-bay listed at about 620 dollars without drives. The trade-off: SnapRAID parity updates on a schedule rather than in real time, there is no hot swap, and setup means getting comfortable with the command line.

GOOD TO KNOW

  • —This is a YouTube build guide, not a repository project.
  • —The video shows Hardware Haven's specific hardware (Lenovo ThinkCentre E73, ASM1166 SATA card, mixed drives) and walks through OpenMediaVault, SnapRAID and MergerFS setup.
  • —A 3D printed 2.5 inch drive bay adapter is linked in the video description (Printables remix).
  • —There is no bill of materials — the entire premise is using whatever used PC and spare drives you already have.
  • —All three software packages (OpenMediaVault, SnapRAID, MergerFS) are open source and free.
  • —No schematic, no custom firmware, no PCB. This is a software configuration build.

Parts to buy

3 items

From our check of the build. Exact quantities and part numbers are in the creator’s BOM.

  • Used office PC (mATX, ideally with standard ATX PSU)Find
  • SATA expansion card if motherboard has fewer than 3-4 portsFind
  • Drives if you do not already have themFind

Can I build this?

PrintOptional 3D printed bay adapter to fit four 2.5 inch drives in a 5.25 inch slot (Printables remix linked in video description)
BuyUsed office PC (mATX, ideally with standard ATX PSU), SATA expansion card if motherboard has fewer than 3-4 ports, drives if you do not already have them
ToolsScrewdriver, USB stick for installer, wired network connection during setup
SkillsBasic Linux — you will edit config files, mount filesystems, and SSH in to troubleshoot. No prior NAS experience required, but if terms like 'fstab' and 'rsync' are completely new, budget extra time for the learning curve.
TimeA weekend: half a day for hardware assembly and OS install, another half day configuring SnapRAID, MergerFS and shares, plus an hour or two of reading documentation when something does not mount or permissions go wrong
Cost$$: the video doesn't list prices. The point is reusing a used office PC and drives you already have, compared with a Synology DS923+ at about 620 dollars before drives.
SafetyMains voltage inside the PC case, as with any desktop. No lithium cells or lasers.

Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.

Videos

I Think I Found the Cheapest Way to Build a NAS

Hardware Haven walks through the entire build: hardware selection, SATA card installation, OpenMediaVault setup, SnapRAID and MergerFS configuration, and power measurements. Description links the software and the Printables bay adapter.

More builds like this

All projects

Gallery

Start here

Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.

  1. 1.Watch the Hardware Haven video (The video is the guide — it covers hardware selection, the SATA card install, and the entire software stack setup.)
  2. 2.Find a used office PC(Look for mATX or mini tower machines with standard ATX power supplies and enough internal space for drives. 4th gen Intel or newer is fine. Avoid ultra-small form factor machines with proprietary PSUs.)
  3. 3.Check motherboard SATA ports(Most office boards have 2-4 ports. If you are planning more drives, order an ASM1166 or similar PCIe SATA card before you start.)
  4. 4.Install OpenMediaVault(Burn the installer to USB, boot, follow prompts. The video shows the entire process.)
  5. 5.Configure SnapRAID and MergerFS(SnapRAID handles parity, MergerFS pools drives. Both have clear documentation, and the video links to setup guides.)

KNOWN ISSUES

  • Buying the wrong kind of used PC. Ultra-small form factor machines with proprietary power supplies are a pain — you cannot fit standard drives easily and replacement PSUs are expensive. Stick to standard mATX towers.
  • Expecting RAID behaviour from SnapRAID. Parity syncs run on a schedule (daily or weekly), not in real time. If a drive dies between syncs, you lose everything written since the last run. This is fine for media storage, less fine for live databases.
  • Underestimating the Linux learning curve. If you have never edited a config file or used SSH, this will take longer than a weekend. OpenMediaVault has a web interface, but SnapRAID and MergerFS setup still means the command line.

Can I use any old office PC?

As long as it is mATX or larger with a standard ATX power supply and room for drives, yes. Avoid ultra-small form factor machines — they use proprietary parts and cannot fit standard 3.5 inch drives easily.

What is the real difference between this and a Synology?

A Synology has true RAID, hot swap bays, a warranty and a polished interface. This has none of those, but if you already have the PC and drives you mostly pay for a SATA card, and you control the whole software stack.

How much does the SATA card cost?

The video doesn't give a price. He used an ASM1166 card because the board only has three SATA ports, so check that your board has a free PCIe slot.

Can I add drives later?

Yes. MergerFS pools whatever drives you add, and SnapRAID parity needs to be synced again after the change.

What happens if a drive dies?

SnapRAID can rebuild the lost drive from parity, as long as only one drive fails and you have run a parity sync recently. If two drives die, or if the drive dies after writing a lot of new data but before the next sync, you lose that data.

Community builds

No community builds yet — be the first, we feature the best ones.

Discussion1

FROM THE COMPAREE TEAM

Hardware Haven measured 21 watts at idle with mixed drives spinning down — and the whole point is reusing drives you already have. What drives are sitting in your drawer right now?

CompareeTEAM1mo ago

Practical notes from our verification: the video is the entire guide — there is no separate repository or written documentation, just links in the description to OpenMediaVault, SnapRAID, MergerFS, and the Printables bay adapter. The cost advantage depends entirely on already owning drives; if you are buying four new IronWolfs, a Synology starts to look reasonable. The biggest gotcha is SnapRAID's scheduled parity sync — it is not live RAID, and that trips people up when a drive fails.

Hardware Haven

Hardware Haven runs a YouTube channel focused on practical home server and storage builds. The channel demonstrates real-world setups with secondhand hardware and open-source software, testing power consumption and walking through configuration step by step.

Star the project on GitHub

DISCLAIMER

  • Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
  • Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
  • Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.