TURN A BMW I3 INTO AN ELECTRIC PICKUP
A non-running BMW i3 with over 100,000 miles became a working electric pickup for under 8,000 dollars, with a wooden bed and a hidden range-extender hack.
by Michael Pick
- difficulty
- ●●●●●
- time
- several weekends
- license
- license not specified
- repo
- repo
●●●●● · several weekends · license not specified · repo
WHAT YOU’LL NEED
Jump to section
COMPAREE VERDICT
Michael Pick bought a 2017 BMW i3 REx at auction for roughly 5,600 dollars, cut off the rear roof and cabin, and built a pickup bed from wood sealed in epoxy. The total build came in under 8,000 dollars. The i3 REx has a small two-cylinder petrol engine that charges the battery but never drives the wheels. Using a Bluetooth adapter and the BimmerCode app, he unlocked a hidden setting that allows manual control of the range extender instead of only triggering near-empty. He also added a CarPlay screen. On battery alone the truck does about 100 miles; with the range extender running and two spare fuel cans in the bed, it reaches 300-plus miles total. This is inspiration, not a how-to. The video shows the finished truck and key moments but no detailed plans, fastener lists, or wiring diagrams. Cutting a car's body is serious fabrication work, and the video doesn't show how the cut structure was reinforced, so you need real experience and a realistic view of what is street-legal where you live. The wooden bed works but is not weatherproof like metal. The BimmerCode unlock is clever but voids warranties and may not be legal in all regions. If you have the skills and tools to safely modify a car, this is a fascinating proof that a dead EV can be saved for the price of a good used motorcycle. If you are learning fabrication, start smaller.
IN THE REPO
GOOD TO KNOW
- —This is a one-off build documented in a single YouTube video, not a project repository.
- —No CAD files, bill of materials, wiring diagrams or step-by-step instructions exist.
- —The video shows the process and results but does not provide plans to replicate it.
- —Structural modification to a car requires fabrication skills and safety expertise not covered in the video.
- —The wooden bed is sealed with epoxy and is functional but not factory-grade weatherproofing.
- —No licence applies because there are no released files or documentation.
Parts to buy
4 itemsFrom our check of the build. Exact quantities and part numbers are in the creator’s BOM.
Can I build this?
Build at your own risk. Projects involve tools, electronics and sometimes mains voltage — follow the creator’s safety notes.
Videos
Gas Prices Are Insane, So I Built My Own Electric Truck
Full build story with auction purchase, cutting process, bed construction, BimmerCode unlock and final cost breakdown. Posted 24 October 2026, approximately 1.06 million views.
More builds like this
All projectsGallery
Start here
Navigation into the creator’s own docs — we don’t rewrite the guide, we route you to the source.
- 1.Watch the full YouTube video to understand the scope and safety implications (The video shows the process but does not provide replication plans. Treat it as inspiration and a feasibility proof.)
- 2.Research local laws on vehicle structural modification and roadworthiness testing(Cutting a unibody changes crash structure. Many regions require engineering certification before a modified vehicle can be registered.)
- 3.Source a BMW i3 REx (the version with the range extender) from an online auction(The REx version has the two-cylinder range extender. Verify the battery health and whether the vehicle is repairable or salvage-titled.)
- 4.Plan the cuts and how you will keep the body strong(The video shows where he cut but not structural calculations. Get experienced help before cutting a car's body.)
KNOWN ISSUES
- Buying a BMW i3 without the REx (range extender) option — the standard i3 is battery-only and will not have the two-cylinder generator this build relies on for the 300-mile range.
- Cutting the car's body without fabrication experience or a reinforcement plan. The video shows the cuts but not engineering details, so you are on your own for making it strong and safe.
- Assuming the wooden bed is waterproof. Epoxy seals wood but is not the same as welded metal with drainage. Expect the bed to need maintenance and possible resealing.
- Changing the range extender setting with BimmerCode without checking what it means for warranty and local rules.
- Not checking whether a structurally modified vehicle can be registered where you live. Many places require engineering sign-off, and some will not allow a cut unibody back on the road at all.
- Underestimating cost. The $8,000 figure assumes you already own cutting and woodworking tools, and does not include registration, inspection or potential legal fees for certification.
Can I build this without fabrication experience?
No. Cutting away the roof and rear of a car changes how its body carries loads, and the video doesn't document reinforcement in detail. This is not a beginner project.
Will a non-REx i3 work for this build?
The non-REx i3 is battery-only and will not have the range extender generator. You will be limited to about 100 miles of range and cannot replicate the 300-mile total shown in the video.
Is the BimmerCode unlock legal?
It depends on your region. BimmerCode changes a factory setting; it may affect warranty and how the car is certified where you live, so check before changing it.
How weatherproof is a wooden bed sealed with epoxy?
It works but is not as durable as metal. Epoxy-sealed wood will resist water but can crack, delaminate or need resealing over time, especially with UV exposure and load cycling.
Can I register a modified i3 as a pickup?
That depends entirely on local laws. Some regions allow owner-built or modified vehicles with engineering sign-off; others will not register a cut unibody at all. Check before you start cutting.
Community builds
No community builds yet — be the first, we feature the best ones.
Discussion1
FROM THE COMPAREE TEAM
The video claims under $8,000 total, but that assumes you already own fabrication tools. What do you think the real all-in cost would be for someone starting from scratch?
Michael Pick
Michael Pick built this i3 pickup conversion as a personal project and documented it on his YouTube channel.
DISCLAIMER
- Comparee is not the author of the projects featured here. All rights to each project belong to its creator — every page links to the original source, and we never host creators’ files.
- Information is provided without warranty and may become outdated as projects evolve. Prices are indicative bands only — always check the creator’s parts list for current costs.
- Building and operating any project is at your own responsibility. Protective equipment, safe workshop practice and compliance with local regulations are the builder’s responsibility.
CompareeTEAM13d ago
Practical notes from our verification: this is a YouTube build story, not a repository with files or instructions. The video is real and the truck exists, but there are no CAD files, BOM, or step-by-step plans to replicate it. The $8,000 figure comes from an InsideEVs breakdown and assumes auction luck and existing tools. The BimmerCode unlock is a genuine feature but was region-locked by BMW for emissions compliance, so legality varies. The biggest thing to know before even considering this: cutting a unibody car is serious structural work that requires real fabrication experience and often cannot be legally registered without engineering certification. Treat this as proof that a dead EV can be saved creatively, not as a weekend project.